We are a prominent manufacturer, supplier and exporter of
superior abrasion resistant conveyor belting, that find application in airports, shipyards, thermal power plants and various other industries. Engineered with utmost precision, these conveyor belts are widely used for the transportation of glass, cullet, granite, trap rock and other abrasive materials.
Dimensionally accurate and functionally superior, these abrasion resistant conveyor belts are used for moving bulk product from production to storage and storage to production. Optimization of premium quality rubber makes these conveyor belts flawless in performance. We also entertain the clients' queries and customize these belts as per their specific requirements.
-
Belt covers compounded from super abrasion rubber
-
Resistance to water
-
High elasticity
-
Heat resistant
Grade |
Tensile Strength |
Elongation at Break |
Maximum Abrasion Loss |
Polymer / Rubber |
Working Temperature Range |
Application |
Superior Abrasion Resistant |
Mpa |
% Minimum |
MM3 |
|
Degrees |
|
SAR 90 or W as per DIN 102 |
18 |
400% |
90 |
PBR Blend |
- 45 to + 50 |
Extremely abrasive material such as cold clinker, cold sinter, mortar, hardrock, etc. |
SAR 70 + or A as per AS1332 |
17 |
400% |
70 |
PBR Blend |
- 45 to + 50 |
Extremely abrasive material such as cold clinker,cold sinter, mortar, hardrock, etc. |
Note :
-
Values mentioned above are minimum requirements. Actual values may differ.
-
Working Temperature & application are recommendations only. Customer may deviate depending on actual conditions.
-
Above is subject to changes with change of process, technology etc.
-
Values not mentioned can be obtained from ECB, if required.
Packaging
For container shipments, belts are wound on steel cores. Outer surface of belt roll is covered with rubberized fabric and sides are covered with plastic corrugated flanges. For break - bulk shipments, belts are packed in wooden drums with MS flanges and tie rods on sides.