Eurotherm Heat Resistant Conveyor Belts
EUROTHERN® Generation of conveyor belts has been developed considering the growing industrial requirements for bulk conveying of hot materials using heat resistant conveyor belts. Keeping ourselves abreast with latest technology, we manufacture and exports at least four grades of best quality heat resistant conveyor belts. Fabricated from premium quality rubber compounds, these heat resistant conveyor belts are well-suited for heat resistance applications, where the temperature of conveying materials is over 100°C (212°F) and up to intermittent peak temperature about 250°C (482°F).
| Belt Grades | Tensile Strength | Elongation At Break | Maximum Abrasion Loss | Polymer/ Rubber | Working Temperature Range | Applications |
|---|---|---|---|---|---|---|
| EUROTHERM Type | mPa, (Minimum) | % Minimum | mm3 | Degree, °C | ||
| SHR-T1 (IS-1891, Part-I/II) | 12.5 | 350 | 200 | SBR Blend | 100°C Max for Fines 125°C Max for Lumps | For hot materials such as crushed cement, foundry sand, fertilizers, clinker, coke etc. |
| SHR-T2 (IS-1891, Part-I/II) | 12.5 | 350 | 200 | SBR Blend | 125°C Max for Fines 150°C Max for Lumps | For hot materials such as crushed cement, foundry sand, fertilizers, clinker, soda ash, coke etc. |
| SHR-T3 (Customized by ECBPI) | 12.5 | 350 | 200 | SBR Blend | 150°C Max for Fines 180°C Max for Lumps (intermittent temp.) | Very hot & abrasive materials as above |
| UHR (Customized by ECBPI) | 12 | 300 | 200 | EPDM | 180°C Max for Fines 250°C Max for Lumps (intermittent) | Hot coke, iron pellets, sintered ore, hot lime stone, cement clinker, soda ash etc. |