Cold Vulcanizing Solution Belts

Heat Resistant Conveyor Belts

 

 

 

 

Cold Vulcanizing Solution Belts

 

 

 

 

Technical Data Sheet for:

Eureka Conveyor Beltings Pvt. Ltd, COLD VULCANIZING CEMENT

TDS #: IRI/TDS/CVS/0001                        Rev. # 1 Rev. Date: 01/04/2015

---------------------------------------------------------------------------------------------

MATERIAL CODE NUMBER(S): Cold Vulcanization Solution (IR-CVS-1001).

CONTAINERS/PACKAGING: 1000 ml to 50 liters in plastics cans properly sealed.

FIELD OF APPLICATION: Suitable for chemical (cold) applications Suitable for pulley lagging, conveyor belt splice jointing; any rubber to metal bonding like tank lining, any rubber-to- rubber bonding, any canvas-to-canvas bonding etc.

PRODUCT ADVANTAGES: Suitable for cold chemical applications; Optimum adhesion for tube repairs; Long shelf life.

INSTRUCTIONS FOR USE: Clean the area to be buffed with a suitable solvent Cleaner. Use a low-speed buffer (< 5,000 rpm) to buff the area to be repaired / worked out. After the working area has been properly buffed , clean the area with a brass brush to remove any buff particles.

NOTE: Do not use Cleaner, solvents, or compressed air on the buff texture. Apply an even coat of Cold Vulcanizing Fluid to the buffed area. Allow to dry (drying time depends on atmospheric conditions)

NOTE: Do not use compressed air, heat guns, or other artificial means to aid in the drying process. Close container tightly after using.

 

SAFETY INSTRUCTIONS: Use personnel protective equipments for your safety.

SHELF LIFE: 1-2 years in unopened container from date of manufacture, if stored at 20-25°C and keep away from direct sunlight.

BASE SOLVENT: Ethyl Acetate (refer to MSDS for detailed data).

RECOMMENDED STORAGE CONDITIONS: Store in a dark, moisture free environment, away from direct Sunlight; Protect from freezing, Comply with all local, state, and federal regulations.

WORKING TEMPERATURE: +10 °C to 40 °C.

HARDENER for curing: 50 ml of Indana Hardener (IR-CVH-1002) to be used along with 1000 ml of rubber cement. Once the hardener bottle is opened up to be used totally, otherwise the liquid content material may be depolymerized in presence of moisture .

DRYING TIME: Minimum of 5 minutes (drying time depends on atmospheric conditions, and may be longer in cold, humid areas)

POT LIFE: 4-6 hrs; throw away the balance unused adhesive once the working life period is over.

LAYER ACTIVE TIME: Approx. 30 minutes@20°C.

APPLICATION QUANTITY: 300-350 gms/m2 per coat.

TOTAL CURING TIME: 24 hrs. approx

APPLICATION TECHNIQUES:

: Rubber/rubber-cord materials/fabrics: 2 layers

: Rubber with bonding layer: 1 layer

: Primed metal: 1 layer

 

ADDITIONAL INFO: Do not dilute. Use full strength only.

 

TECHNICAL SPECIFICATION ON COLD VULCANIZATION SOLUTION

1.0 Material: Indana’s Cold Vulcanization Solution (IR-CVS-1001) with Indana Hardener ( IR-CVH-1002)

2.0 Polymer Type: Neoprene based 2-part cold vulcanization adhesive solution with hardener

3.0 Colour and Appearance: Yellowish / Greenish / Bluish viscous liquid (cement)

4.0 Solid Content: 20 +/-2%

5.0 Viscosity: 2000 +/-50 CPS @23°C

6.0 Specific Gravity: 0.95 +/-0.05

7.0 Shelf Life: 1-2 yrs if stored at 20/25°C and kept away from sunlight.

8.0 Bonding Strength ,kg/inch:

Parameter

Indana-CVS-1001

Best Competitor (Imported)

Competitor (Imported)

One Indian Sample

Rubber –metal:

 

 

 

 

After 3 hrs:

7.5

7.0

5.5

4.5

After 24 hrs:

19

17

12

9

After 168 hrs:

22

16

12

9

Rubber-rubber (24 hrs)

14

12

10

7

Fabric ply-ply (belt)-24 hrs

13

12

9

5



IMPORTANT DISCLOSURE: M/S Eureka Conveyor Beltings Pvt. Ltd, believes that the information contained on this data sheet is accurate. It is based on extensive tests and represents standard values.

However, it may not contain information on all confirmed properties. M/S IRI reserves the right to carry out improvements and technical development to this product at its discretion.

The suggested procedures are based on experience as of the date of publication. They are not necessarily all-inclusive, nor fully adequate in every circumstance. Also, the suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements.

No warranty is made, express or implied, of merchantability, fitness for a particular purpose or otherwise.

 

CONTACT US:

Technical Dept, Eureka Conveyor Beltings Pvt. Ltd,, F-53 Chambal Industrial Area, Kota Rajasthan, India,Pin-324 003, tel.ph: +91-744-2480717/2480025,Fax. No.+91-744-2480202, Mob.no.+91-9314448982,8696944441, Website: http://eurekabeltings.com